Filter
Top Products
99
Editing with another VCR
Additional Operations
Editing with another VCR
How to connect to record on this VCR
If the other VCR has a CONTROL S OUT jack for synchronized editing
(SLV-N80 only)
Connect to record on this VCR, then connect the VCRs via the CONTROL S jacks.
The CONTROL S connection lets you control (pause and release pause) both VCRs
from the recording VCR.
Notes
• Make sure you connect the plugs to jacks of the same color.
• If the other VCR is a monaural type and connected to this VCR’s LINE-2 IN jacks, connect
the audio plug to the AUDIO L (white) jack. The sound is recorded on both right and left
channels. If you connect to the AUDIO R (red) jack, the sound is recorded only on the right
channel.
• If you connected this VCR to both the LINE IN and LINE OUT jacks of the other VCR,
select the input correctly to prevent a humming noise.
• You can use the LINE-1 IN jacks for editing. If the other VCR is a monaural type, the sound
is recorded only on the channel whose jack is connected to the audio plug. To record on both
right and left channels, connect the audio plugs to the AUDIO R/L jacks using a VMC-
910HG audio/video cable (not supplied).
• (SLV-N80 only)
If the CONTROL S IN jack is used for S-Link™ (A/V bus control) connection with a TV, the
CONTROL S connection cannot be used for editing.
This VCR (Recorder)
Other VCR (Player)
LINE OUT
: Signal flow
LINE-2 IN
TV
VMC-810HG audio/video cable (not supplied)
continued