Filter
Top Products
47
Adjusting the picture
Additional Operations
Adjusting the picture
Adjusting the tracking
Although the VCR automatically adjusts the tracking
when playing a tape, distortion may occur if the
recording is in poor condition. In this case, manually
adjust the tracking.
During playback, press PROGRAM +/– on the VCR
to display the tracking meter. The distortion should
disappear as you press one of the two buttons. To
resume automatic tracking adjustments, eject the tape
and re-insert it.
Adjusting the picture sharpness
You can manually adjust the sharpness of the picture.
1
During playback, press MENU, then press M/m/</, to highlight
USER SET and press OK.
2
Press M/m to highlight PICTURE, then
press ,.
3
Press </, to adjust the sharpness.
To soften the picture, press <.
To sharpen the picture, press ,.
4
Press MENU to exit the menu.
TRACKING –––––– ––––––
Tracking meter
SET
MENU:
:
OK:END
SELECT
PICTURE : 90
OSD ON:
OFF:
TAPE SELECT E180:
COLOUR SYSTEM AUTO:
TIMER METHOD
ECO. MODE
VARIABLE:
:
EXIT
SET
MENU:
:
OK:
SOFTEN SHARPEN
–– –––––––––– ––– ––––––
PICTURE
END EXIT