Filter
Top Products
Additional Operations
34
Using the shuttle ring
During playback or pause, turn the shuttle ring on the VCR clockwise or
anticlockwise. Each change in the shuttle ring position changes the playback
mode in the following way.
Tip
• Adjust the picture using the TRACKING +/– buttons if:
– Streaks appear while playing in slow motion.
– Bands appear at the top or bottom while pausing.
– The picture shakes while pausing.
To set tracking to the centre position, press both buttons (+/–) at the same time.
Notes
• The sound is muted during these operations.
• If the playback mode mark doesn’t appear on the TV screen, press DISPLAY.
• The picture may have a snow when playing at high speed in reverse.
Slow motion
in reverse
High speed
High speed
in reverse
Slow motion
Normal speed
(Initial speed)
Normal speed
in reverse
Double speed
in reverse
Double speed
Pause
Playing/searching at various speeds (continued)