Filter
Top Products
53
Recording TV programmes using the ShowView system
Basic Operations
Master Page : Right
filename[010BAS.fm] model name1[SLV-SE310D] model name2[SLV-SE510D] [3-065-669-E1 (1)]
2
Press the programme number
buttons to enter the ShowView
number.
Ifyoumakeamistake,press
CLEAR and re-enter the correct
number.
3
Press OK.
The date, start and stop times,
programme position or station
name, tape speed, and VPS/PDC
setting appear on the TV screen.
• If “– –” appears in the “PROG.”
(programme) column (this may
happen for local broadcasts), you
have to set the appropriate
programme position manually.
Press M/m to select the desired programme position.
To record from a decoder or other source connected to one or
more of the LINE inputs, press INPUT SELECT to display the
connected line in the “PROG.” position.
You will only have to do this operation once for the referred
channel. The VCR will then store your setting.
• When you have selected A (Austria), CH (Switzerland), or D
(Germany) with the country selection in the Auto Set Up
procedure, the VPS/PDC function is automatically set to ON.
For details about the VPS/PDC function, see “Timer recording
with VPS/PDC signals” on page 54.
If the information is incorrect, press CLEAR to cancel the setting.
4
If you want to change the date, tape
speed, and the VPS/PDC setting:
1 Press </, to highlight the
item you want to change.
2 Press M/m to reset it.
• To record the same programme
every day or the same day every
week, see “Daily/weekly
recording” on page 54.
• To use the VPS/PDC function, set
VPS/PDC to ON.
123
456
789
0
CLEAR
MENUEXIT :
SHOWVIEW
SET :
–
0–9
SHOWVIEW NO.
1246––– –
FRI28.9
CANCEL
CONFIRM
:
:
OK
CLEAR
CLEAR
OK
PLAY
INPUT
SELECT
DATE
CANCEL
SET
:
:
SELECT :
CLEAR
MENUEXIT :
TIMER
SP / LP
LIST
TIME PROG.
TODAY 519:00 20:00 3
SP VPS / PDC OFF
FRI28.9
OK
PLAY
DATE
CANCEL
SET
:
:
SELECT :
CLEAR
MENUEXIT :
TIMER
SP / LP
LIST
TIME PROG.
TODAY 519:00 20:00 3
SP VPS / PDC ON
FRI28.9
continued