Filter
Top Products
43
Recording TV programmes using the Dial Timer
Basic Operations
Master Page : Right
filename[010BAS.fm] model name1[SLV-SE310G/I] [3-065-672-11 (1) GB]
To return to the previous step
To return to the previous step, press the PROGRAM + and – buttons on the
VCR at the same time during any of the Dial Timer settings.
To stop recording
To stop the VCR while recording, press x STOP.
To use the VCR after setting the timer
To use the VCR before a recording begins, just press ?/1. The indicator
turns off and the VCR switches on. Remember to press ?/1 to reset the VCR
to recording standby after using the VCR.
You can also do the following tasks while the VCR is recording:
• Reset the counter (page 36).
• Display tape information on the TV screen (page 39).
• Check the timer settings (page 57).
• Watch another TV programme (page 39).
7
Press DIAL TIMER.
The programme position or station name appears in the display
window.
8
Turn DIAL TIMER to set the programme position.
To record from another source connected to the LINE input, turn
DIAL TIMER or press INPUT SELECT to display the connected
line in the display window.
9
Press DIAL TIMER to complete the setting.
“OK” appears in the display window for about five seconds.
The indicator appears in the display window and the VCR stands
by for recording.
To record from another source, leave the connected equipment
switched on.
DIAL TIMER
P
T
VIDEO
SP
OPC
DIAL TIMER
P
T
INPUT
SELECT
VIDEO
SP
OPC
DIAL TIMER
P
T
continued