Filter
Top Products
47
Recording TV programmes using the VIDEO Plus+ system
Basic Operations
Master Page : Right
filename[010BAS.fm] model name1[SLV-SE310G/I] [3-065-672-11 (1) GB]
3
Press OK.
The date, start and stop times,
programme position or station
name, tape speed, and VPS/PDC
setting appear on the TV screen.
If “– –” appears in the “PROG.”
(programme) column (this may
happen for local broadcasts), you
have to set the appropriate
programme position manually.
Press M/m to select the desired programme position.
To record from another source connected to the LINE input, press
INPUT SELECT to display the connected line in the “PROG.”
position.
You will only have to do this operation once for the referred
channel. The VCR will then store your setting.
If the information is incorrect, press CLEAR to cancel the setting.
4
If you want to change the date, tape
speed, and the VPS/PDC setting:
1 Press </, to highlight the
item you want to change.
2 Press M/m to reset it.
• To record the same programme
every day or the same day every
week, see “Daily/weekly
recording” on page 48.
• To use the VPS/PDC function, set
VPS/PDC to ON.
For details about the VPS/PDC function, see “Timer recording
with VPS/PDC signals” on page 48.
5
Press MENU to exit the menu.
6
Press ?/1 to turn off the VCR.
The indicator appears in the display window and the VCR stands
by for recording.
To record from another source, leave the connected equipment
switched on.
CLEAR
OK
PLAY
INPUT
SELECT
DATE
CANCEL
SET
:
:
SELECT :
CLEAR
MENUEXIT :
TIMER
SP / LP
LIST
TIME PROG.
TODAY 519:00 20:00 3
SP VPS / PDC OFF
FRI28.9
OK
PLAY
DATE
CANCEL
SET
:
:
SELECT :
CLEAR
MENUEXIT :
TIMER
SP / LP
LIST
TIME PROG.
TODAY 519:00 20:00 3
SP VPS / PDC ON
FRI28.9
MENU
continued