Sony SLV-X817SG VCR User Manual


 
Additional Operations
SLV-X817/717ME/PS/SG 3-858-651-11 (1)
36
Editing with another VCR (continued)
Before you start editing
Turn on your TV and set it to the
video channel.
Press INPUT SELECT to display “L2”
in the display window.
Press TAPE SPEED to select the tape speed (SP or LP for the PAL
system, and SP or EP for the NTSC system).
1 Insert a source tape with its safety tab removed into the other
(playback) VCR. Search for the point to start playback and set it to
playback pause.
2 Insert a tape with its safety tab in place into this (recording) VCR.
Search for the point to start recording and press P PAUSE.
3 Press r REC on this VCR and set it to recording pause.
4 To start editing, press the P PAUSE buttons on both VCRs at the same
time.
To stop editing
Press the p STOP buttons on both VCRs.
Tips
To edit more precisely, press the P PAUSE buttons on the VCRs to release pause.
To cut out unwanted scenes while editing, press P PAUSE on this VCR when an
unwanted scene begins. When it ends, press P PAUSE again to resume recording.
Note
If you start recording following the procedure above, the VCR won’t start recording
with the APC function. To record a tape with the APC function, press r REC again
during recording pause in step 3 so that the VCR analyses the tape. Then when you
start recording in step 4, press P PAUSE after the APC indicator stops flashing. If
you press P PAUSE before the APC indicator stops flashing, the APC function is
cancelled.
Operation
(when recording on this VCR)
P PAUSE
r REC