Sony DVP-F21 DVD Player User Manual


 
37
Playing Discs
enjoy DTS Digital Surround playback, an
external 5.1-channel decoder system must
be connected to the digital jack of the
player.
Set the sound to STEREO using the
AUDIO button when you play DTS sound
tracks on a CD (page 51).
Do not play DTS sound tracks without first
connecting the player to an audio
component having a built-in DTS decoder.
The player outputs the DTS signal via the
DIGITAL OUT (OPTICAL) jack even if
DTS in AUDIO SETUP is set to OFF
in the Setup Display (page 73), and may
affect your ears or cause your speakers to be
damaged.
Notes on playing DVDs with a DTS
sound track
DTS audio signals are output only through
the DIGITAL OUT (OPTICAL) jack.
If you connect the player to audio
equipment without a DTS decoder, do not
set DTS to ON in AUDIO SETUP
(page 73). A loud noise may come out from
the speakers, affecting your ears or causing
the speakers to be damaged.
When you play a DVD with DTS sound
tracks, set DTS to ON in AUDIO
SETUP (page 73).
Notes
When you insert an 8-cm (3-inch) disc, insert the
disc slowly at the center of the disc slot. If you
cannot eject the disc, consult your nearest Sony
dealer.
No adaptor is required in order to play 8-cm (3-inch)
discs on this player. If an adapter is used, damage to
the player may result; therefore, never use an adapter
when playing 8-cm (3-inch) discs.
Additional operations
z The Replay function is useful when you want to
review a scene or dialog that you missed.
Note
You may not be able to use the Replay function with
some scenes.
To Operation
Stop
Press
x
Pause
Press
X
Resume play after
pause
Press
X or H or N
Go to the next chapter,
track, or scene in
continuous play mode
Press
>
Go back to the
preceding chapter,
track, or scene in
continuous play mode
Press
.
Stop play and remove
the disc
Press
A
Replay a previous
scene (DVD only)
Press REPLAY
./>
x
XN
A
./>
H
x
X
REPLAY