Filter
Top Products
33
Hookups
Enjoying the surround sound
effects
To enjoy the surround sound effects of this
player or your amplifier (receiver), set the
following items as described below for the
audio connection you selected on pages 26 to
28 ( through ). Each of these is the
default setting and does not need to be
adjusted when you first connect the player.
See page 76 for using the Setup Display.
Audio Connection (pages 26 to 28)
• No additional settings are needed.
• Set “DOWNMIX” to “DOLBY
SURROUND” (page 81).
• Set “DOWNMIX” to “DOLBY
SURROUND” (page 81).
• Set “DIGITAL OUT” to “ON” (page 81).
• Set “DISTANCE,” “LEVEL (FRONT),”
and “LEVEL (REAR)” according to the
connected speakers (page 83).
z Hints
• For connections
Set “48kHz/96kHz PCM” to “96kHz/24bit,” only
if you connect an amplifier (receiver) that
conforms to the 96 kHz sampling frequency
(page 82).
• For connections
If the sound distorts even when the volume is
turned down, set “AUDIO ATT” to “ON”
(page 80).
B D
A
B-1
C-1
B-2 C-2 D-2
D-1
B-2 C-2
D-2
B-1
C-1 D-1