Sony DVP-S300 DVD Player User Manual


 
8
EN
Getting Started
pWhen using a coaxial digital connectiong cord
Notes
Refer to the instructions supplied with the component
to be connected.
You cannot make digital audio recordings of discs
recorded in Dolby* Digital (AC-3) format directly
using an MD deck or DAT deck.
When you make the connections above, do not set
“DIGITAL OUT” in “INITIAL SETUP 2” to “DOLBY
DIGITAL/PCM.” If you do, a loud noise will
suddenly come out from the speakers, affecting
your ears or causing the speakers to be damaged.
z If you have a digital component with a built-in Dolby
Digital decoder
Connect the component via the DIGITAL OUT OPTICAL
or COAXIAL connector using an optical or coaxial digital
connectiong cord (not supplied). When the component
with a built-in Dolby Digital decoder is connected, the
player plays DVDs with sound recorded in Dolby Digital
(AC-3) format while producing the effect of being in a
movie theater or a concert hall.
In the setup display, set “DIGITAL OUT” in “INITIAL
SETUP 2” to “DOLBY DIGITAL/PCM.” (page 35)
pWhen using an optical digital connectiong cord
Take off the cap and plug in the optical digital
connectiong cord.
Coaxial digital connectiong cord
(not supplied)
CD/DVD player
Amplifier with a
digital connector, MD
deck, DAT deck, etc.
* Manufactured under license from Dolby Laboratories.
“Dolby”, “Pro Logic” and the double-D symbol a are
trademarks of Dolby Laboratories.
Confidential Unpublished Works. ©1992-1997 Dolby
Laboratories, Inc. All rights reserved.
Optical digital connectiong cord
(not supplied)
CD/DVD player
Component with a
built-in Dolby Digital
decoder
Coaxial digital connectiong cord
(not supplied)
CD/DVD player
Component with a
built-in Dolby Digital
decoder
DIGITAL IN
COAXIAL
OPTICAL COAXIAL
DIGITAL OUT
PCM/
DOLBY DIGITAL (AC-3)
DIGITAL IN
COAXIAL
OPTICAL COAXIAL
DIGITAL OUT
PCM/
DOLBY DIGITAL (AC-3)
pWhen using a coaxial digital connectiong cord
Note
Refer to the instructions supplied with the component to
be connected.
CD/DVD player
Audio/Video/S-link cord
(supplied)
z If your TV has an S-link connector
You can control the CD/DVD player from the TV.
Connect the TV via the S-LINK connector using the S-link
cable (supplied). Refer to the instructions supplied with
the TV to be connected.
TV
S-LINK
S
LINK
S-link
S-link
OPTICAL COAXIAL
DIGITAL IN
OPTICAL
DIGITAL OUT
PCM/
DOLBY DIGITAL (AC-3)