Filter
Top Products
179
Troubleshooting Уcтpaнeниe нeиcпpaвноcтeй
Type of trouble and their solutions
Symptom Cause and/or Corrective Actions
• Moisture condensation has occurred.
c Remove the cassette and leave your VCR for at least one hour
to acclimatize (p. 201).
• Some troubles have occurred in your VCR.
c Remove the cassette and insert it again, then operate your
VCR.
• Remove the i.LINK cable (DV connecting cable), and connect it
again (p. 69).
• Disconnect the power cord (mains lead) of the AC power
adaptor or remove the battery, then reconnect it after about one
minute. Turn the power on. If the functions still do not work,
press the RESET button on the backside of your (recording)
VCR using a sharp-pointed object. (If you press the RESET
button, all the settings including the date and time return to the
default.)
• Charge is completed.
• The battery pack is not properly installed.
c Install it properly (p. 15).
• The POWER switch is not set to OFF (CHG).
c Set it to OFF (CHG) (p. 16).
• The battery pack is not properly installed.
c Install it properly (p. 15).
• Something is wrong with the battery pack.
c Please contact your Sony dealer or local authorized Sony
service facility.
• The USB cable was connected before installation of the USB
driver was completed.
c Uninstall the incorrect USB driver and re-install the USB
driver (p. 98, 151).
• The setting of USB MODE switch is not correct.
c Set USB MODE switch correctly (p. 99, 152).
• Moisture has started to condense in your VCR (p. 201).
The melody or beep sounds for
five seconds.
While editing using the i.LINK
cable (DV connecting cable), the
picture cannot be monitored.
No function works even though the
power is on.
While charging the battery pack, the
POWER ON/CHARGE lamp does
not light up.
You cannot charge the battery pack.
While charging the battery pack, the
POWER ON/CHARGE lamp
flashes.
Image data cannot be recognized
with the USB connection.
The cassette cannot be removed
even if the cassette lid is open.