Filter
Top Products
Setting Up the LCD Projection TV
39
Setting Up the LCD Projection TV
KDF-WE/WF655
2-059-370-14 (2)
VCR and Cable Use this hookup if:
❑ You have cable TV that does not require a cable box.
Disconnect all power sources before making any connections.
1 Connect the CATV cable to the single (input) jack of the splitter.
2 Using a coaxial cable, connect one of the output jack of the splitter to
the LCD projection TV’s CABLE jack.
3 Using a coaxial cable, connect the splitter’s other output jack to the
VCR’s input jack.
4 Using A/V and S VIDEO cables, connect the VCR’s AUDIO and
S VIDEO OUT jacks to the LCD projection TV’s AUDIO and S VIDEO
IN jacks.
VHF
/U
H
F
C
ABL
E
RL
AUDIO IN
VIDEO IN
S VIDEO
VIDEO
AUDIO
L
(MONO)
R
1 3 4
7
Coaxial cable
Rear of LCD projection TV
VIDEO (yellow)
AUDIO-L (white)
AUDIO-R (red)
CATV cable
VCR
A/V cable
(not supplied)
S VIDEO
S VIDEO cable (not supplied)
Coaxial cable
✍ If your VCR is not equipped with S VIDEO, use a VIDEO cable (yellow)
instead of the S VIDEO cable.
01COV.book Page 39 Thursday, February 17, 2005 8:01 PM