Filter
Top Products
Setting Up the LCD Projection TV
57
Setting Up the LCD Projection TV
KDF-WE/WF655
2-059-370-14 (2)
2 Gently push the card into the slot until it locks into place.
3 After 1-2 minutes, the CableCARD setup screen is automatically
displayed. This screen includes information your cable TV company
will request before they can activate your service.
4 Follow the displayed instructions: Phone your cable TV company. A
representative will guide you through the activation process.
5 After your CableCARD is activated, your cable TV company will
download the service information, including the channel list, to the
CableCARD. After the CableCARD has acquired channels from your
cable TV company, the TV tunes to the lowest available channel.
Removing the
CableCARD
In the event you want to cancel your service, contact your cable TV
company.
1 Push the eject button on the TV’s CableCARD slot to release the card.
2 Pull the CableCARD straight out of the slot to remove it.
To install a different CableCARD, follow the instructions in “Activating
CableCARD Service” on page 56.
You can also access
information about your
CableCARD in the
Applications Menu (see
page 116).
z
✍ Once the CableCARD is removed, your TV will no longer decrypt digital
cable TV programming services that require CableCARD.
Eject button
01COV.book Page 57 Thursday, February 17, 2005 8:01 PM