Filter
Top Products
Using the Menus
28
Using the Sound Settings
Option Description
Target Inputs Determines whether to apply Sound Settings to current input only, or to all inputs.
All Inputs Settings will be applied to “All Inputs” (ex: TV is showing Video 1.
Changes to the picture settings affect TV, Video1 - Video7)
“All Inputs” will override any settings set by “Current Input.”
Current Input Settings will be applied to only the “Current Input” (ex: TV is showing
Video 1. Changes to picture settings affect only Video 1)
Sound Mode
Customized
sound listening
Dynamic Select to enhance treble and bass.
Standard Suitable for spoken dialog.
Custom Flat setting. Allows you to store your preferred settings.
Sound Mode can also be accessed using the TOOLS button on the remote
control when in Analog TV, Digital TV and External Inputs.
Reset Resets the current Sound Mode setting to the default values, except MTS.
Tre bl e Adjust to increase or decrease higher-pitched sounds.
Bass Adjust to increase or decrease lower-pitched sounds.
Balance Adjust to emphasize left or right speaker balance.
Steady Sound On Select to stabilize the volume across all programs and commercials.
Off Select to turn off Steady Sound.
Surround TruSurround XT Select for surround sound (for stereo programs only).
Simulated Stereo Adds a surround-like effect to mono programs.
Off Select for normal stereo or mono reception.
BBE Select to give sound more impact by compensating for phase effects in speakers. Select from
High, Low, and Off.
MTS
Enjoy stereo, bilingual
and mono programs
Stereo Select for stereo reception when viewing a program broadcast in stereo.
Auto SAP Select to automatically switch the TV to second audio programs when a
signal is received. If no SAP signal is present, the TV remains in
Stereo mode.
Mono Select for mono reception. Use to reduce noise during weak stereo
broadcasts.
MTS is only available for analog programs.