Sony KDL-40XBR2 Flat Panel Television User Manual


 
Getting Started
18
KDL-40XBR2/KDL-46XBR2/KDL-40XBR3/KDL-46XBR3
2-678-575-11(1)
D:\WINNT\Profiles\fujii\Desktop\2678575111\01US03INS.fm
masterpage:3 columns Right
Installing the TV
Preventing the TV
from Toppling Over
Attaching the Support Belt
1 Screw the support belt (supplied) to the TV stand with a wood screw
(supplied).
2 Attach the support belt to the stand with the securing screw (supplied)
using a coin, etc.
3 Adjust the length by pulling the support belt toward you while holding
the TV stand.
Bundling the
Connecting Cables
You can bundle the connecting cables as illustrated below.
Be sure to take measures to prevent the TV from toppling over and
causing injury.
The supplied wood screw may not be used depending on the type of TV
stand. In this case, or when the securing strength is not enough, use
commercial screws 3 to 4 mm (1/8 to 3/16 inches) diameter to fit to the
TV stand. Consult your dealer about the types of screw.
Do not bundle the AC power cord with other connecting cables.
P
C
I
N
A
U
D
I
O
L
R
5
A
U
D
I
O