Sony KDL-S32A11E Flat Panel Television User Manual


 
31
GB
Using the Menu
Do the following options.
1 Press OK to select “AV Preset”.
2 Press M/m to select the desired input source, then press OK.
3 Press OK. Then press M/m to select the desired option below, then
press OK.
Before selecting “Label”/“AFT”/“Audio Filter”/“Skip”/“Decoder”/”ATT”, press PROG +/-
to select the programme number with the channel. You cannot select a programme number
that is set to skip (page 33).
1 Press OK to select “Manual Programme Preset”.
2 Press M/m to select one of the following options, then press OK.
AV Preset
Option Description
Label
Sound Offset
Assigns a name to any equipment connected to the side and rear
sockets. The name will be displayed briefly on the screen when the
equipment is selected.
Press M/m to select one of the following, then press OK.
AV1 (or AV2/AV3/AV4/PC/HDMI) VIDEO/DVD/CABLE/
GAME/CAM/SAT: Uses one of these preset labels.
Edit: Creates your own label. Follow steps 3 through 5 of
Programme Labels (page 30).
Skip:
Skips an input source that is not connected to any equipment when
you press M/m to select the input source.
After selecting this option, press OK.
Sets an independent volume level to each equipment connected to
the TV.
Press
, to select “Sound Offset”, then press OK. Press M/m to
select the desired volume level.
Manual Programme Preset (Analogue mode only)
Continued