Filter
Top Products
Watching TV
17
GB
Watching TV
1 Press @/1 on the TV to switch on the TV.
When the TV is in standby mode (the 1/
(standby/sleep timer) indicator on the front of the
TV flashes red), press TV "/1 on the remote to
switch on the TV.
2 Press the number buttons or PROG +/– to
select a TV channel.
To select channel numbers 10 and above using the
number buttons, enter the second digit within 2.5
seconds.
Additional operations
Watching TV
2
1
2
To Do this
Turn off the TV
temporarily
(Standby mode)
Press TV "/1.
Turn off the TV
completely
Press @/1 on the top of the TV.
Adjust the volume Press 2 + (increase)
/– (decrease).
Mute the sound Press %. Press again to restore.
Return to the
previous channel
watched (for more
than five seconds)
Press .
Access the
Programme index
table
Press OK. To select a channel,
press M/m, then press OK.
To access the Input signal index
table, see page 18.
Switch the TV
automatically to the
standby mode after a
specified time period
– Sleep
Press repeatedly to set the
desired time (30, 60, 90 or 120
minutes).
Temporarily freeze
and review the
picture on the screen
Press . Press again to cancel.
Continued