Filter
Top Products
19
Installing and Connecting the TV
Connecting a Digital TV Receiver
Disconnect all power sources before making any connections.
1 Using three separate component video cables, connect the Digital TV
Set-top box’s Y, P
B and PR jacks to the Y, PB and PR jacks on the TV. Use
the VIDEO 3 IN connections.
Note
Component video (Y, PB, PR) connection is necessary to view 480p, 720p, and 1080i
formats. Note that this TV displays all format types of picture in a resolution of 1280 dots
× 768 lines.
2 Using an AUDIO cable, connect the Digital TV Set-top box’s AUDIO
OUT jacks to the TV’s AUDIO IN jacks.
Note
The Y, PB and PR jacks do not provide audio, so audio cables must be connected to
provide sound.
VHF/UHF R-AUDIO-L VIDEO S VIDEO
VIDEO 1 IN
AUDIO OUT
RL DC IN 14.5V
R-AUDIO-L
VIDEO 3 IN
YP
B
P
R
VMC-10HG (not supplied)
Digital TV Set-top box
RK-74A (not supplied)
Rear of TV
P
R
PB
Y
AUDIO-R (red)
AUDIO-L (white)