Filter
Top Products
29
Connecting and Setting the TV
VIDEO IN
1
3
VIDEO S VIDEOAUDIO
R
L
(
MONO
)
CENTER SPEAKER
IN
180W (6 ) MAX
HD/DVD IN
AUDIO OUT
(
VAR/FIX
)
P
B
YLRP
R
AUDIO
4
RL
Connecting a DVD Player with Component Video
Connectors
Use this hookup if:
•Your DVD player has component (Y, P
B, PR) jacks.
Tips
• The Y, PB and PR jacks on your DVD player are sometimes labeled as Y, CB and CR, or Y,
B-Y and R-Y. If so, connect the cables to the matching colors.
• To take advantage of the Wide Screen Modes, set the aspect ratio of the output signal to
16:9 on your DVD player. For details, refer to the operating instructions supplied with your
DVD player.
Disconnect all power sources before making any connections.
1 Using a component video cable, connect the DVD player’s Y, PB and PR
jacks to the Y, PB and PR jacks on the TV. Use the HD/DVD 4 IN
connections.
2 Using an AUDIO cable, connect the DVD player’s AUDIO OUT jacks to
the TV’s AUDIO IN jacks.
Note
The Y, PB and PR jacks do not provide audio, so audio cables must be connected to
provide sound.
Rear of TV
P
R
PB
Y
AUDIO cable
(not supplied)
Component video cable
(not supplied)
DVD Player
AUDIO-L (white)
AUDIO-R (red)