Filter
Top Products
39
SETUP Setup SETUPSETUP SETUPSETUP
Digital TV Set-Top
Box with
Component
Video Connectors
To connect a digital TV set-top box with component video connectors
1 Use three separate component video cables to connect the DVD
player’s Y, P
B and PR jacks to the Y, PB and PR jacks (VIDEO 5) on
the TV.
2
Use an audio cable to connect the set-top box’s audio output jacks
to the TV’s VIDEO 5 audio input jacks.
Notes on Using This Connection
✍ The Y, PB and PR jacks on your DVD player are sometimes labeled Y,
C
B and CR, or Y, B-Y and R-Y. If so, connect the cables to like colors.
To Do This ... Do This ...
Watch the digital TV set-top
box
Press TV/VIDEO repeatedly to select the digital TV set-top box input (VIDEO 5
in the illustration).
Label video inputs to easily
identify equipment connected
to the TV
See the instructions for setting up Video Labels on pages 83-84.
Component video cables
Audio cable
TV
Digital TV Set-Top Box
Cables are often
color-coded to connectors.
Connect red to red,
white to white, etc.
✍ You cannot record the signal from any equipment connected into the Y, PB,
P
R jacks.