Sony KP 57WV700 Projection Television User Manual


 
91
Welcome SETUP Other InfoSETUP SETUPSETUP
Remote Control
Memory Stick
Problem Possible Remedies
Remote control
does not operate
The batteries could be weak. Replace the batteries.
Check the orientation of the batteries.
Press the TV FUNCTION button. You may have inadvertently pressed the
SAT/CABLE FUNCTION button, which changes the remote control to SAT or
CABLE mode.
Make sure the TVs power cord is connected securely to the wall outlet.
Locate the TV at least 3-4 feet away from fluorescent lights.
Cannot change channels
with the remote control
If you are using the TV to change channels, first press the TV FUNCTION
button.
If you are using another device to change channels, be sure you have not
inadvertently switched your TV from the channel 3 or 4 setting. Use the
Channel Fix option to fix the channel based on the hookup you used (see
page 78).
If you are using another device to change channels, be sure to press the
FUNCTION
button for that device. For example, if you are using your cable box
to change channels, be sure to press the
SAT/CABLE FUNCTION
button.
Remote control
does not operate non-Sony
video equipment
If you replaced the batteries to the remote recently, the code numbers for
the video equipment may need to be reset.
There may be more than one code for the equipment that you are
attempting to operate.
There is a possibility that some non-Sony equipment cannot be operated by
your Sony TV remote.You may need to use the equipments original
remote control.
Problem Possible Remedies
Image does not display Make sure the image is supported by the TV (see pages 64-65).
Make sure the Memory Stick is inserted properly (see page 66).
Memory Stick functions are not available while using Twin View, Freeze or
Favorite Channel functions.
Blank square appears
instead of a thumbnail image
This indicates that the image does not support a thumbnail view. Selecting
the icon, however, displays the full-size image on the screen. It could also
indicate that both the thumbnail and full-size images are corrupted or not
supported.
Cannot rotate image, no
thumbnail appears
Be sure the LOCK switch on the Memory Stick is set to off.
If a blank square appears instead of the thumbnail image, this indicates
that the image does not support a thumbnail view and cannot be rotated.
Cannot hear audio while
using Memory Stick
There is no audio available while using Memory Stick.
Image file name does not
appear; instead, dashes (---)
appear
Dashes appear instead of the file name if the image was recorded using
equipment that is not DCF-compliant. Dashes also appear if a DCF-
compliant file was renamed.