Sony KP 61HS20 Projection Television User Manual


 
Installing and Connecting the Projection TV
24
Model name1[KP-43HT20] Model name2[KP-53HS20/30] Model name3[KP-61HS20/30]
[4-081-143-11 (1)]
Connecting a Satellite Receiver with a VCR
Disconnect all power sources before making any connections.
1
Connect the satellite antenna cable to the satellite receivers
SATELLITE IN jack.
2
Connect the CATV cable to the VCRs VHF/UHF IN jack.
3
Using a coaxial cable, connect the VCRs OUT jack to the projection
TVs VHF/UHF jack.
4
Using AUDIO and S VIDEO cables, connect the satellite receivers
AUDIO and S VIDEO OUT jacks to the VCRs AUDIO and S VIDEO
IN jacks.
5
Using AUDIO and S VIDEO cables, connect the VCRs AUDIO and S
VIDEO OUT jacks to the TVs AUDIO and S VIDEO IN jacks.
Coaxial
cable
Rear of projection TV
S VIDEO
AUDIO-R (red)
AUDIO-L (white)
VIDEO (yellow)
Satellite receiver
VCR
YC-15V/30V
(not supplied)
VMC-810S/
820S (not
supplied)
YC-15V/30V (not supplied)
VMC-810S/820S
(not supplied)
Satellite
antenna
cable
Cable
Be sure your VCRs video input is set correctly. Consult your VCRs
operating manual for instructions.
Use TV/VIDEO to select
- VIDEO 1 to watch satellite TV or the VCR. (Your VCR must be turned
on)
- VHF/UHF to watch cable TV.
If your VCR or satellite receiver is not equipped with S VIDEO, use a
VIDEO cable (yellow) instead of the S VIDEO cable.