Filter
Top Products
9
Using the Remote Control and Basic Functions
Using the Remote Control and
Basic Functions
This section shows you how to use more advanced buttons on the remote control
and how to use the on-screen menus.
.
Button Description
Press when you want to turn the TV on
and off.
Turns the TV off automatically in
approximately 30, 60 or 90 minutes. Cancel
by pressing until SLEEP OFF appears.
Instantly turns off the sound. Press again
or press to restore sound.
Cycles through the available video inputs.
Press once to show current time, (if set)
and channel number. Press again to
activate CAPTION VISION settings, if
available. To cancel, press again until
DISPLAY OFF appears.
Cycles through the Multi-Channel TV
Sound (MTS) options: STEREO, SAP
(Second Audio Programming) and
MONO, (KV-20S90 only).
Press for channel selection, the channel
will change after 2 seconds.
Press after selecting a channel using the
buttons to immediately activate
selection.
Alternates back and forth between the last
two channels selected with the
buttons.
Displays the on-screen menu. Press again
to exit the menu at any time.
Activates highlighted selections in the
on-screen menu.
The remote control shown (RM-Y155) is for KV-20S90. For KV-13M42 and
KV-20M42 models, your remote control does not have the MTS button.
JUMP ENTER
SLEEP
POWER
MUTING
MTS
CHVOL
RESET SELECT
MENU
RM-Y155
TV
0 9
0 9
0 9