Filter
Top Products
11
Using the Remote Control and Basic Functions
Setting Up the TV Automatically
After you have finished connecting your TV, you will want to run AUTO
PROGRAM to set up your channels, (KV-13M42, see page 17 for
information on AUTO PROGRAM).
For models KV-20M42, KV-20S90 only
1 Press to turn on the TV, the Initial setup screen appears.
(U.S. models only) (Canadian models only)
2 Make your language selection, the on-screen menus will change to
reflect your choice.
3 Follow the on-screen instructions to continue AUTO SET UP or for a
DEMO of the menus.
For U.S. models only
4 Press to operate the on-screen menus without the remote
control. Follow the on-screen instructions to make adjustments to
your TV settings.
To perform Auto Setup again
Press the and buttons on the front panel of the TV and follow
steps 2-4.
To reset your TV to factory settings, turn the TV on. Then, while pressing the
button on the remote control, press POWER on the TV. The TV will turn
itself off, then back on, the original settings will be restored.