Sony KV 32HV600 CRT Television User Manual


 
19
SETUP Setup SETUPSETUP SETUPSETUP
To connect the cable box and cable
1 Connect the cable from your cable company to the TVs
VHF/UHF jack.
2 Use a coaxial cable to connect the TVs TO CONVERTER jack to
the cable boxs input jack. (The TVs internal converter lets you
switch between unscrambled signals coming straight into the TV
and scrambled signals coming in through the cable box,
eliminating the need for an external splitter.)
3 Use a coaxial cable to connect the cable boxs output jack to the
TVs AUX jack.
4 Run the Auto Setup program, as described in Setting Up the
Channel List on page 38.
Notes on Using This Connection
1
2
3
OUT
Coaxial cable
IN
AUX
TO
VHF/UHF
Cable (unscrambled channels)
Coaxial cable
CONVERTER
TV
Cable box
To Do This ... Do This ...
Use the cable box Tune the TV to the channel the cable box is set to (usually channel 3 or 4)
and then use the cable box to switch channels.
Set up the TV remote control
to operate the cable box
Program the remote control. See Programming the Remote Control on
pages 43-44.
Activate the remote control to
operate the cable box
Press SAT/CABLE FUNCTION.
Prevent the accidental
switching of TV channels
When using the cable box, you need the TV to stay on the channel the cable
box is set to (usually channel 3 or 4). You can use the TVs Channel Fix
feature to lock in a specific channel. For details, see Using the Channel
Menu on page 68.
Switch
the TVs input
between the cable box and
cable
Press ANT to switch back and forth between the TVs VHF/UHF
(unscrambled channels) and AUX (scrambled) inputs.