Sony KV 36FS13 CRT Television User Manual


 
Installing the TV
28
Setting Up the TV Automatically
After you finish connecting your TV, you can run Auto Setup to set
up your channels. The Auto Setup screen appears when you turn
your TV on for the first time after installing it. If you do not want to
set up the channels at this time, you can do it later by using the Auto
Program feature in the Channel menu (see page 40 for information
regarding Channel menu).
Using Auto Setup 1 Turn on the TV.
2 Press the TV FUNCTION button on the remote control.
3 Press CH+ to run Auto Setup.
4 After Auto Setup has run, press CH– to exit.
Reset TV to Factory Settings
To reset your TV to the factory settings
1 Turn on the TV.
2 Hold down the RESET button on the remote control.
3 Press and release the POWER button on the TV. (The TV will turn
itself off, then back on.)
4 Release the RESET button.
The Auto Setup feature does not apply for installations that use a cable box for
all channel selection.