Filter
Top Products
47
SmartFile Function
Setting timer recording in
the Blank Time space
If you set the timer to record programs
while a SmartFile tape is inserted, the
VCR searches for the Blank Time space.
When the Blank Time space is located,
the VCR goes to the beginning of the
Blank Time space and stands by for
recording. If there is a recorded
program after the Blank Time space, the
VCR will record over that program
unless you stop recording. If there is a
program you want to prevent from
being recorded over or erased, protect
that program before you start recording
another program (see page 58).
Before you start…
• Turn on your TV and set it to the
video channel.
M/m/</,
OK
MENU
VCR Plus+
PlusCode
––––––––
SP / EP
EP
Enter program’s PlusCode
using
0–9 keys
To change tape speed,
push
SP / EP
VCR Plus+
1 Insert a SmartFile tape with its safety tab in place.
The VCR turns on and the SMARTFILE indicator lights up.
2 Set the timer.
• When using the VCR Plus+ GOLD system
(for details, see page 13):
1 Press VCR Plus+.
2 Enter the PlusCode number.
continued
123
456
789
0