Filter
Top Products
64
Recording TV programs using the Dial Timer
filename[010BAS.fm] model name1[SLV-N99]
[3-071-065-11 (1)]
To set the clock
Tips
• To cancel a Dial Timer setting, press x STOP on the VCR while you are making the setting.
• The program is recorded in the current tape speed. To change the tape speed, press SP/EP
before you complete the setting in step 9 (page 63).
• When you are recording a program in the SP mode and the remaining tape becomes shorter
than the recording time, the tape speed is automatically changed to the EP mode. Note that
some noise will appear on the picture when the tape speed is changed. If you want to keep
the tape speed, set AUTO TAPE SPEED to OFF in the ADVANCED OPTIONS menu (page
88).
• To check, change, or cancel the program setting, see “Checking/changing/canceling timer
settings” (page 76).
Notes
• If eight programs have already been set using the VIDEO Plus+ GOLD system or the TIMER
SET/CHECK menu, “FULL” appears in the display window for about five seconds.
• If you are using the Cable Mouse, you cannot select “L1” or “L2.”
• If you set the clock using the Auto Clock Set function, the clock will adjust itself to the
incoming time signal regardless of adjustments made with the Dial Timer. Be sure you have
set ACS correctly.
• If you are setting the clock for the first time or “–:– –” appears in the display window, you
cannot set the clock to February 29
th
using the Dial Timer. Please use the Auto Clock Set
function to set the VCR to this day.
•The
indicator flashes in the display window when you complete the setting in step 9
(page 63) with no tape inserted.
• The station ID appears on the TV screen only when you complete Smart Channel Mapping
and the VCR receives the program information signal (see page 49).
1
Turn DIAL TIMER so that “CLOCK” appears in the display window.
2
Press DIAL TIMER.
“MONTH” appears in the display window.
3
Turn DIAL TIMER to set the month.
4
Press DIAL TIMER.
“DAY” appears in the display window.
5
Turn and press DIAL TIMER to set the day and then the year.
After you set the year, “CLOCK” appears in the display window again.
6
Turn and press DIAL TIMER to set the hour and minute.
7
When you have finished setting the time, press DIAL TIMER to start the clock.
010BAS.fm Page 64 Friday, November 30, 2001 1:52 PM