Filter
Top Products
88
Changing menu options
filename[010ADDO.fm] model name1[SLV-N99]
[3-071-065-11(1)]
Changing menu options
Menu choices
Initial settings are indicated in bold print.
PAGE 1
1
Press MENU, then select ADVANCED OPTIONS and press OK.
2
Press
M
/
m
to highlight the option to change, then press OK.
To go to PAGE2, highlight NEXT and press OK. To return to PAGE1, highlight
PREVIOUS and press OK.
3
Press
M
/
m
to change the setting, then press OK.
To adjust the sharpness, press
<
/
,
and press OK.
4
Press MENU to return to the original screen.
Menu option Set this option to
AUTO ANT SELECT • ON if your TV is connected only to VHF/UHF OUT on the
VCR. To play a tape, set the TV to the VCR channel (channel
3 or 4).
• OFF if your TV is connected to both VHF/UHF OUT and
LINE OUT on the VCR. To play a tape, set the TV to the VCR
input.
AUTO STEREO • ON to receive stereo programs.
• OFF to reduce noise. The sound changes to monaural.
TUNER AUDIO • MAIN to record the main sound on both hi-fi and normal audio
tracks.
• SAP to record the SAP (Second Audio Program) sound on both
hi-fi and normal audio tracks.
TAPE SELECT • AUTO when using a T-160 length tape or any tape shorter than
a T-140 length tape.
• 180 when using a T-140 or T-180 length tape.
For details, see page 59.
AUTO TAPE SPEED • ON to change the timer recording tape speed automatically to
the EP mode when the remaining tape length becomes shorter
than the recording time. To operate AUTO TAPE SPEED, set
TAPE SELECT correctly.
• OFF to keep the same tape speed.
SET :
SELECT :
OK
MENUQUIT :
ADVANCED OPTIONS
PAGE1
AUTO STEREO
AUTO ANT SELECT
TUNER AUDIO
TAPE SELECT
AUTO TAPE SPEED
ON
MAIN
ON
AUTO
FAVORITE CH
ON
ON
NEXT
RETURN
SET :
SELECT :
OK
MENUQUIT :
ADVANCED OPTIONS
PAGE2
REALITY REGENERATOR
APC
SHARPNESS
LH
ON
ON
PREVIOUS
RETURN
010ADDO.fm Page 88 Friday, November 30, 2001 1:54 PM