Filter
Top Products
8 (GB)
If you intend to install a TV that is not specified on page 2, be
sure to refer to the leaflet supplied with your TV.
3
Detach the Table-Top Stand from
the TV.
If your TV is not attached to the Table-Top Stand, this
procedure is not necessary.
Before detaching the Table-Top Stand, disconnect all
the cables from the TV.
1 Remove the four screws from the rear of the TV and
detach the Table-Top Stand.
2 For KDL-46X2000, KDL-40X2000 only, remove
the two screws on the rear of the TV.
4
Attach the two hooks on the rear
of the TV.
Place the TV with its screen facing down on a stable
cloth-covered work surface.
Attach the supplied two hooks with the two supplied
screws (+PSW6 × 16).
For the following models, use the two supplied screws
(+PSW5 × 16) instead:
KDL-52X2000, KDL-46X2000, KDL-40X2000
Screw
Soft cloth
Hook screw
Hook
Soft cloth
Step 4:
Installing the TV
1
Attach the TV to the Floor Stand.
Referring to the hook and screw locations diagram/
table on page 12, insert the two hooks on the rear of the
TV into the top portion of the holes of the Center Pillar.
Be careful not to topple the Floor Stand when attaching the
TV to the Floor Stand.
Note