Filter
Top Products
12 (US)
Confirm the completion
of the installation
Check the following points.
• Four upper hooks of the Mounting Rack are
firmly hooked onto the two anchor bars of
the Plate Unit.
• The cord and the cable are not twisted or
pinched.
• All the securing screws (+B6 × L20, supplied)
are tightened.
WARNING
Incomplete installation may cause the product falling
and result in injury or product damage. Also, improper
placement of the AC power cord, etc., may cause fire or
electric shock through a short circuit.
Be sure to confirm the completion of the installation for
safety.
4 Install the Mounting Rack (with
the TV) onto the Plate Unit.
1 Hold the Mounting Rack so that the two
center notches on either side touch the
support braces of the Plate Unit.
2 Gradually lift the Mounting Rack and TV
upward keeping the center notches engaged
with the support braces of the Plate Unit.
Hitch the upper left and right hooks of the
Mounting Rack onto the anchor bars at the
top of the left and right stabilizer arms of the
Plate Unit.
3 Confirm the four upper hooks are firmly
hooked onto the two anchor bars of the Plate
Unit and that the support braces are secured
in the center notches of the Mounting Rack.
4 Firmly tighten all four upper and lower
screws (+B6 × L20, supplied) on each side of
the Mounting Rack.
4
1
2
1
2
Plate Unit
Mounting Rack
with the TV
Mounting Rack
Support brace
Side view
Right side
Screws
(+B6 × L20, supplied)