Filter
Top Products
11 (GB)
Design and specifications are subject to change without
notice.
Confirming the
completion of the
installation
Check the following points.
• The hooks of the Mounting Hook are firmly latched
in the holes of the Base Plate.
• The cord and the cable are not twisted or pinched.
• The two screws that secure the Mounting Hook and
the Base Plate are securely tightened.
WARNING
Do not adjust the angle of the Mounting Hook when the
TV is installed on the wall and be sure to install
completely. It may cause the product to fall and result in
injury or product damage. Also, improper placement of
the AC power cord, etc., may cause fire or electric shock
through a short circuit.
Be sure to confirm the completion of the installation for
safety.
When removing the TV
1
Unplug the AC power cord from
the wall outlet.
2
Remove the two screws which
secure the TV and the Base
Plate. (Refer to 3 of Step 6 on
page 10 for the screw positions.)
To Sony Dealers
3
Be sure to hold the TV and slide
it upward to remove the TV.
CAUTION
• Be careful not to allow the cord and cables to get
caught when removing the TV.
• Be careful not to hurt your hands or fingers when
removing the TV.
Specifications
Unit: mm (inches)
Weight: 1.2 kg (2 lb 11 oz)
250 (9
7
/
8
) 60 (2
3
/
8
)
140 (5
5
/
8
)