Filter
Top Products
Satellite
In
RF
Out
Ch
3/4
Serial
Control
Audio
OUT
S-Video
R
L
Video
Antenna
In
RF
Out
Ch
3/4
Audio
R
L
Video
IN
OUT
OUT
S-Video
Antenna
In
Audio
R
L
Video
A
B
Satellite Receiver
or cable box
SVR
Recorder
SATELLITE or CABLE BOX with VCR
VCR
Television
ᕡ Connect Satellite or Cable Box to SVR
Recorder. Use either a composite cable alone
(shown), or an S-video cable and the L/R audio
(red and white) ends of a composite cable.
ᕢ Connect the SVR Recorder to the VCR . Use
either a composite cable alone (shown), or
connect an S-video cable and the L/R audio (red
and white) ends of a composite cable. **If you
have a Sony VCR, see the note at the bottom of
the next page.
ᕣ Connect the VCR to the TV . Use either a
composite cable alone (shown), or connect an
S-video cable and the L/R audio (red and white)
ends of a composite cable.
Control Cable Connection.
To record shows or display live TV, the SVR 3000
must change the channel on your cable box or
satellite receiver. To do so, it must send a signal
through either an IR (infrared) or serial control
cable. To connect a control cable, complete
either step ᕤ or step ᕥ, below.
ᕤ If you have a DIRECTV
®
satellite receiver with
a serial input. Connect the serial control cable
from “Control Out-Serial” on the SVR Recorder to
your satellite box. Skip to step ᕦ.
ᕥ If your cable or satellite box is not a DIRECTV
satellite reciever with a serial input: Plug the
metal end of the IR control cable into “Control
Out-IR” on the SVR Recorder (see the picture
below and to the left). Locate the IR sensor on
the front of the cable or satellite box. It’s usually
a tiny round bulb; if you shine a flashlight into
the plastic window on the front of the box, you
can see it. Mount the other two ends of the IR
cable (the IR emitters) in front of the IR sensor.
You can place the emitters above and below the
box. The emitters should stick out about 1.5”
from the front of the box. Use the provided
adhesive strips to secure the emitters.
ᕦ Connect Phone and Power. See “Connect a
telephone line” and “Power on and tune your TV,”
OR
ᕢ**
ᕥ
ᕦ
ᕦ
ᕤ
ᕡ**
ᕣ**
*
The cables shown in these
connections are only examples.
Use cables that will provide the
highest quality connections
available for your equipment.
extends 1½ "
ᕥ
Satellite Receiver
or cable box
IR sensor
(Example only. Follow
instructions to the right to locate
your cable/satellite box's IR sensor)