Filter
Top Products
M
“Setup” setting
Press WEGA GATE and select “Settings”.
Press V or v to select the “Setup” icon (
),
then press .
“Language” Change the menu language.
Press V or v to select either “English” or “Русский” (Russian),
then press .
“Picture Rotation” Adjust the picture position when it is not aligned with the TV
screen.
Press B or b to adjust the picture position, then press .
“Video Label” Label the connected equipment.
(1) Select “Video Input” and press . Press V or v to select the
input you want to label, then press .
(2) Select “Label” and press , then press V or v to select
the label options: “Video 1”/“Video 2”/“DVD”, “VCR”,
“SAT”, “Game” or “Edit”*.
* You may edit the video label to your favorite name. Press V or v
to select alphanumeric characters for the label, then press .
“Color System” Select the color system.
Press V or v to select either “Auto”, “PAL”, “SECAM”,
“NTSC3.58” or “NTSC4.43”, then press . Normally, set this to
“Auto”.
“Wake Up Timer
Allow your TV to emit beeping sound when TV switches on
Beep
” automatically using wake up timer.
Press V or v to select “On”, then press .
To cancel, select “Off”, then press .
“Factory Settings”
Reset your TV to factory settings.
Press and press V or v to select “Yes”. Then press .
Your TV will go blank for a few seconds, then the “Initial Setup”
menu will appear.
To cancel, select “No”, then press .
• Color system is not selectable in FM Radio mode.
•To ensure the beeping sound can be heard, you must set an appropriate volume
level on your TV and make sure the TV is not in mute condition.
•To stop the beeping sound, press any buttons on the remote control or front panel.
• If no button is pressed for three minutes, the beeping sound will automatically go
off.
Confirm
End
Setup
Select
Language:
Picture Rotation
Video Label
Color System: Auto
Factory Settings
English
On
Wake Up Timer Beep: