Speco Technologies D16RS DVR User Manual


 
27
SENSITIVITY
Control the motion sensitivity from 1 to 9.
(9 Highest sensitivity, 1 Lowest sensitivity)
KEY TONE
Enable/disable key tone.
REMOTE
CONTROL ID
Set the remote control ID.
1. Select ID.
2. Input the remote control ID number.
3. An icon will indicate on the Live Screen if the remote control ID is
synchronized.
The options are from 0 to 99
SENSOR
Select the type of each sensor.
Option is Off, Normal Open or Normal Close.
4-4-1. Alarm-Out
Figure 4.4.2. ALARM-OUT Setup Screen
Table 4.4.2. Item for ALARM-OUT Setup Screen
Item
Description
ALARM OUT
Only one Alarm-out is available.
SENSOR IN
Sensor input from 1 to 4.
MOTION ON
Camera motion detection from 1 to 4.
VIDEO LOSS ON
Camera video loss detection from 1 to 4.
ALARM DURATION
Set alarm dwell time from 5 to 60 seconds.
ERROR ALARM
Set the error type for the alarm activation. The options are
OFF, ALL, HDD ERROR and VIDEO LOSS.