Filter
Top Products
37
4-8. Setup – STORAGE Mode
In the SETUP menu, select the STORAGE tab. Then, the STORAGE menu is displayed as pictured below.
Navigate through the menu items using the mouse or the control button on the remote control and change
the value of the menu item.
Figure 4.8.1. STORAGE Setup Screen
Table 4.8.1. Menu Items in STORAGE Setup Screen
Item
Description
OVERWRITE
When enabled, the DVR will continue recording and overwrite the oldest existing
recorded data once the hard drive is full. When disabled, recording will stop once
the hard drive is full.
DISK FORMAT
You will have an option of YES or NO for formatting the Hard Drive.
After formatting HDD, the DVR will reboot.
Caution: It is recommended to archive any data that you may need in the future
before formatting the hard drive.