StarTech.com SV441HDIE Universal Remote User Manual


 
Instruction
Manual
24
Changes/frame
indicates the number of 16x16 blocks of video that are being sent, on
average, for every frame of video. With a static image being displayed by the server, this
number will be zero (shown as
-nil-
). Moving the mouse, for example, will cause the
number to jump to about 2 or 3. You may use this number to judge the picture quality as
you adjust the controls on this menu.
Picture Positioning
affects the image position on your screen. If you see a black line on
either side of your screen, or at the top or bottom, you can use the arrow buttons to shift
the image in that direction. Pressing
Auto
does the same thing for you automatically. Use
Save
to save the changes you have made manually. Since this adjustment depends on
the video mode, separate values are stored for each video mode.
Color Offset
is a fine tuning adjustment that requires the use of a test pattern. There is
a copy of the test pattern available on the
Help!
menu of the integrated web server. You
must arrange for that image to be shown on the host computer. Do not allow scaling,
cropping or any other changes to that image. Press the
Auto
button and the system will
calibrate color for the best possible picture in approximately one minute. If the system
cannot find the test pattern on the screen, it will say so. Check that the pattern isn't
scaled or covered up. It's important to do this operation in 24-bit or 32-bit color video
mode (i.e. truecolor). Although the algorithm may work in 16-bit or 8-bit color video
modes, the results will not be optimum and usually it won't be able to recognize the test
pattern.
Pressing the
Advanced
button will open the
Advanced Video Tuning
menu. While the
vast majority of users will not need to adjust these settings, it offers added control of the
video settings of your VNC sessions.
Sampling Phase
does not normally need to be used since SVxx41HDIE tunes the
sampling phase whenever the video mode changes. This button does not require a test
pattern, but will perform optimally when used with our standard test pattern. For your
reference, the sampling phase number is shown to the right of the
Filtering
button.
Noise Filter
controls the advanced video filtering of our system. Unlike other filtering
algorithms, our noise filter will only remove noise. It does not degrade the signal quality
or readability of small text. You may turn it on and off using the indicated button, or set it
to other values using the arrows. Higher numbers cause more filtering and may cause
artifacts when moving windows. The most common visual artifact is a vertical line
dropping when moving windows horizontally. You may use the
Redraw
button to correct
these, or use a lower filter number. At minimum, these values must be greater than two.