Filter
Top Products
Instruction Manual
5
Color Bar
1. Press the Menu button to call up the OSD menu.
2. Use the +/- buttons to scroll to the Color Bar icon. Press the Select button to view
the color bar settings.
3. Use the +/- buttons to turn on/o the color bar.
4. When you are happy with the color bar settings press the Menu button or leave
theconverter idle to save your settings and exit the OSD.
Reset
This function will reset all your functions back to their default settings.
1. Press the Menu button to call up the OSD menu.
2. Use the +/- buttons to scroll to the Reset icon.
3. Press the Select button to return all your functions to their default settings.
Using the Remote
When using the remote control, be sure to aim the remote in the direction of the IR
receiver on the front of the converter. The functions on the remote generally operate in
a similar manner to the functions on the converter, with a few exceptions:
• There is no OSD main menu with the remote. Pressing a button on the remote
will automatically take you to the settings for that function. To toggle through
the settings for a function, press the function button. (For example, to change
the brightness settings with the remote, press the Bright button to bring up the
brightness settings on the OSD. Now toggle through the brightness settings by
pressing the Bright button again.) To save your settings and exit the OSD, leave the
remote idle for a few seconds.
• The arrow and Home buttons on the remote correspond to the Position function.
The arrow keys position the display and the Home button returns the screen to its
default position.
• The Reset button will return the Brightness and Sharpness values to their default settings.
• The Zoom button toggles between Zoom and normal modes. When in Zoom mode,
the Z-Q button scrolls between the four quadrants of the screen.
• The remote also features a Freeze button that allows you to pause the image on
your TV screen. Toggle Freeze mode on and o by pressing the Freeze button. While
in Freeze mode, your computer monitor will stay active and the Power LED on the
converter will ash. When you exit Freeze mode, the VGA signal will convert to the
TV screen as usual.