Filter
Top Products
SunBriteTV Model 3220HD Operator’s Manual
Page 15Page 15
TV Installation – Rear Panel Connections
CONNECTING TO A SATELLITE OR CABLE SET-TOP BOX
1. Make sure the power of the TV and your set-top box is
turned off .
2. Connect a HDMI cable to the HDMI output of your set-top
box and the other end to the HDMI port off the back of your
TV.
3. Turn on the MODEL 3220HD and your set-top box.
4. Use the remote control’s source button or the source
button on the right side of the TV to switch to HDMI.
Please Note :
1 Please refer to the set-top box’s manual, to make sure the
set- top box is confi gured to output correctly to the TV.
2 SunBriteTV’s MODEL 3220HD supports SONY’s universal
remote code. Please look up SONY’s codes in your universal
remote’s hand book.
1. Make sure the power of TV and your set-top box is turned off .
2. Obtain a Component Cable. Connect the green color connector
to both your set-top box and Component 1’s green connector port
off the back of your TV.
3. Connect the blue color connector to both your set-top box and
Component 1’s blue connector port off the back of your TV.
4. Connect the red color connector to both your set-top box and
Component 1’s red connector port off the back of your TV.
5. Obtain a RCA Audio Cable. Connect the white color connector
to both your set-top box and Component 1’s white connector port
off the back of your TV to the right side of your green, blue, red
component connection.
6. Connect the red color connector to both your set-top box and
Component 1’s red connector port off the back of your TV to the
right side of your green, blue, red component connection.
7. Turn on the TV and your set-top box.
8. Use the remote control’s source button or the source button on
the TV to switch to YPbPr1.
Please Note :
1. If Component 1 is already occupied, please use Component 2
as your connection port and switch to source YPbPr2.
2. Please refer to the set-top box’s manual to make sure the set-
top box is confi gured to output correctly to the TV.
3. SunBriteTV’s MODEL 3220HD supports SONY’s universal
remote code. Please look up SONY’s codes in your universal
remote’s hand book.
Connecting with HDMI (Best)
Connecting with
Component (Better)