Filter
Top Products
SunBriteTV Model 3220HD Operator’s Manual
Page 9
Page 9
TV Installation – Rear Panel Internal Connect Source
WARNING: Do not connect the power source before making connections.
Internal Connect Source
The Internal Connect Source allows you to easily connect to the Audio, Video, S-Video, SVGA, HDMI, Audio Out, and RF connectors.
The Internal Connect Source is inside the Cable Cover located on the back of the unit (Figure1).
1. Unscrew the two gray Thumb Screws (Figure1), and pull the cover towards you.
2. Route the cables to the proper inputs, and place the cable cords over the Rubber Sealing Gasket (Figure 2).
3. Close the cover.
4. Press fi rmly on the cover, and screw the Thumb Screws tightly (Figure3).
Figure 1
Figure 2
Figure 3
Rubber Sealing Gasket
Thumb Screws
need new photo here