Filter
Top Products
6-6
SUPERSERVER 6012P-6 Manual
Figure 6-4. Removing SCSI Drives
2. Installing/removing hot-swap SCSI drives:
The SCSI drive bays are located in the front of the chassis, making them
easily accessible for installation and removal. The SCSI drives are hot-
swap units, meaning that they can be installed and removed while the
system is running. To remove a SCSI drive, first push the colored
release button located beside the drive's LEDs, then swing the handle
fully out and use it to pull the SCSI drive carrier straight out (see Figure
6-4).
!
Important: All of the SCSI drive carriers must remain
in the drive bay to maintain proper cooling airflow.