Filter
Top Products
User Manual
PRESS (UP DOWN), ENTER (SELECT)
PRESS (MENU) TO EXIT
MAIN MENU
CAMERA SELECT 1234
RECORD SELECT 1234
RESOLUTION EACH
RECORD FRAME 25
RECORD QUALITY HIGH
SCHEDULE SET
MISCELLANEOUS MENU
HARD DISK SET
VIDEO MODE PAL
MOTION SET
FACTORY RESET
[
SEL]: Select/modify settings
[
Menu]: Press exit/previous menu
[
Menu]: Push to enter system menu
[
Up] and [ Down]: Move the cursor
5.2 Camera Select
- 6 -
The DVR system can display 4
cameras at once or you can limit the
number of cameras displayed to save
HDD space.
Press [
SEL] to modify setting, or
press [CH1], [CH2], [CH3] and [CH4] to
set each channel separately.
If a channel is disabled, the system will display “OFF” on the monitor; this
channel will not be recorded. (Refer to 5.3 Record Select)
5.3 Record Select
Manually set which channels are allowed to record.
Note: If no channels are selected, an error message will appear briefly on the
screen when record is selected. “1234” indicates all cameras are set to record.