Filter
Top Products
TIMER REC STANDBY
– TIMER PROGRAMMING –
CH DATE BEGIN END
B
61 7/03 MON 7:30
P
M
8:50
P
M
- -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
– TIMER PROGRAMMING –
CH DATE BEGIN END
B
61 7/03 MON 7:30
P
M
8:50
P
M
SP
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- TV/VCR SETUP -
B TIMER PROGRAMMING
SETTING CLOCK
CHANNEL SET UP
USER’S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
INDEX SEARCH
19
EN
RECORDING
TV/VCR SECTION
AUTOMATIC TIMER RECORDING
TV/VCRTV/VCR
– TIMER PROGRAMMING –
CH DATE BEGIN END
B
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
– TIMER PROGRAMMING –
CH DATE BEGIN END
B
61 -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
5 Use [
KK
/
LL
] to set the desired
begin/end hour and minute.
Press
[
BB
] to move to next item.
6 Use [
KK
/
LL
] until the desired
tape speed appears.
(Refer to "SELECTING TAPE
SPEEDS" on page 15.)
7 Press [ENTER] to complete setting.
•
To set another program, repeat steps 2 to 7.
•To correct the program while setting, press
[
ss
]
to go back one step and use [
KK
/
LL
] to enter
the correct numbers.
• Press
[SET-UP] to exit the menu.
8 Press [POWER] to set automatic timer recording.
The recording indicator lights up.
NOTES:
•You MUST turn off the unit to activate automatic
timer recording.
•If power is not turned off and
you continue watching TV,
"TIMER REC STANDBY" starts
flashing on the TV screen 2 min-
utes before the programmed
start time.
• Make sure a cassette with erase-prevention tab is
inserted before turning off the unit. If the cassette does
not have the tab, it will be ejected when you press
[POWER] to turn off.
9 At the programmed start time, the unit begins
recording.
NOTES:
•The recording starts without turning on the TV screen.
•
During recording, you can watch only currently
being recorded TV program or DVD playback.
Press [POWER] and [SELECT] to select the desired
mode.
•If the tape runs out before the end time, the recording
stops immediately and the cassette will be ejected.
TO CONFIRM THE PROGRAM
1 Press [POWER] to turn on the unit.
(The Recording indicator turns off.)
2 Press [SET-UP].
Use
[
KK
/
LL
] to select "TIMER PROGRAMMING",
then press
[ENTER].
3 Confirm the details of programs that appear on
the TV screen.
4 Press [SET-UP] to exit the menu.
– TIMER PROGRAMMING –
CH DATE BEGIN END
B
61 EVRY MON -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
– TIMER PROGRAMMING –
CH DATE BEGIN END
B
61 7/03 MON -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
You can set 8 programs to record on
specific days, daily or weekly within
1 year period.
In the example below, the timer is being set to record:
DATE: July 3rd, 2006
SETTING TIME: from 7:30PM to 8:50PM
CHANNEL: CH61
TAPE SPEED: SP
1 Press [SET-UP].
Use
[
KK
/
LL
] to select
"TIMER PROGRAMMING",
then press
[ENTER].
NOTE:
•If you have not yet set the clock, "MANUAL CLOCK
SET" menu appears. Set to the present time and
date (refer to "MANUAL CLOCK SETTING" on page
10) then start setting the timer recording.
2 Use [
KK
/
LL
] to select the
desired program position, then
press
[
BB
].
3 Use [
KK
/
LL
] until the desired
channel number appears, then
press
[
BB
].
NOTE:
•If the unit is connected to a cable box or satellite box,
the unit must be on CH3 or CH4. Select the channel
to be recorded on the cable box or satellite box.
4 Set the starting date.
For once recording :
Press [
KK
] until the desired
date appears. Then press
[
BB
].
For every day recording :
To record the same channel
at the same time every day.
Press [
LL
] until "EVRY DAY"
appears, then press
[
BB
].
For weekly recording :
To record the same channel
at the same time every week.
Press [
LL
] until "EVRY" and
your desired day of the week
(Ex. Every Monday) appear,
then press
[
BB
].
– TIMER PROGRAMMING –
CH DATE BEGIN END
B
61 EVRY DAY -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
T1203UD(EN/SP).QX3 06.2.15 7:14 PM Page 19