Filter
Top Products
–
27
–
EN
Some DVD discs contain scenes which have been shot
simultaneously from various angles. You can change
the camera angle when the “”icon appears on the
screen.
1 Press [ANGLE] during playback.
•
The selected angle will be displayed on the dis-
play bar at the top of the screen.
•
If the “ANGLE ICON” setting is “OFF” in the
“OTHERS” menu, the “”icon will not
appear. (Refer to page 31.)
2 Press [ANGLE] repeatedly to select your
desired angle.
Adjust the Black Level Settings to make the black
parts of the picture brighter.
1 Press [MODE] during playback then press
[ENTER] to switch “ON” or “OFF”.
ON: Makes the dark parts brighter.
OFF: Shows the original picture as recorded.
(Initial setting)
2 Press [MODE] twice or [RETURN] to exit.
•
The setting will be saved even if the unit is
turned off.
You can enjoy surround-sound effect over two speak-
ers on this unit.
1 Press [MODE] repeatedly during playback
then press [ENTER] to set it “1”, “2” or “OFF”.
1: Natural effect
2: Emphasized effect
OFF: Original Sound
2 Press [MODE] to exit.
•
You can also exit the menu by pressing
[RETURN].
For CD play only:
•
Virtual Surround will not be effective if the
sound mode is set to something other than
STEREO. (Refer to “STEREO SOUND
MODE” on pge 26.)
VIRTUAL SURROUND
OFF
BLACK LEVEL SETTING
OFF
CAMERA ANGLE
1 / 8
ANGLE
ANGLE
MODE
twice OR
MODE
RETURN
twice
MODE
ENTER
MODE
DVD SECTION
CHANGING THE SETTINGS
NOTE
NOTE