Filter
Top Products
–
39
–
EN
01A11
SEARCH FUNCTION
TRACK SEARCH
There are three ways to begin playback on an Audio
CD and MP3 at a specific track.
Using the Number buttons on the remote control
1 Press the Number buttons to enter the
desired Track number.
¡
Playback will start at the selected track.
¡For single digit tracks (1-9), press a single number
(eg. track 3, press 3).
¡To play track 26, press +10, 2, 6.
Using the SEARCH MODE button
1 Press the SEARCH MODE button.
¡
The track search display appears.
2 Within 30 seconds, select a desired track
number using the Number buttons on the
remote control.
¡
For single digits press 0 first, if the total track of the
disc is more than 10 tracks.
¡Playback will start at the selected track.
Using the PREV/NEXT (
HG
) buttons
During playback, press the NEXT G button to move
the next track. Press it repeatedly to skip subsequent
tracks. Press the PREV H button to go back to
beginning of the current track. Press it repeatedly to go
to the previous tracks.
¡If the NEXT G button is pressed while the play-
back is paused, the playback will be paused again
after skipping to the next track.
NOTE
¡The PREV/NEXT (
HG
) buttons are not avail-
able when playback is stopped.
MP3CD
TITLE / CHAPTER SEARCH
1 Press the SEARCH MODE button once for
the Chapter search twice for the Title search
during playback.
2 Enter the desired chapter/title number using
the Number buttons on the remote control.
¡
Playback will start at the selected chapter or title.
¡Press the CLEAR button to erase the incorrect input.
¡For single digits press 0 first, if the total chapter or
title of the disc is more than 10.
DVD-V
_/2
TIME SEARCH
1 During playback press the SEARCH MODE
button three times (CD: twice) to display the
Time Search on the TV screen.
2 Within 30 seconds, enter a desired disc
time using the Number buttons on the
remote control.
¡
Playback will start at the specified time.
¡Press the CLEAR button to erase the incorrect input.
¡When there is no need to enter a number, “0”
appears automatically. For example, “ 0 : 0
-
:
- -
”
appears in the Time Search display if the total time
of the track or title is less than 10 minutes.
CD
DVD-V
MARKER SETUP SCREEN
Use markers to memorize your favorite places on a
disc.
1 Press the SEARCH MODE button four times
(CD: three times) during playback.
¡
The display screen and Markers will appear on the
TV screen.
2 Press the Arrow button (s / B) to select 1, 2,
3, 4, 5, 6, 7, 8, 9, or 10 and ensure that “
- - -
-
:
- -
:
- -
” appears in the display.
3 When you reach the desired point press the
ENTER button.
¡
The Title or Track and elapsed playing time will
appear on the TV screen.
4 To return to the Marker later, press the
SEARCH MODE button four times (CD: three
times) during playback and the Arrow but-
ton (s/B) to choose the desired marker
then press the ENTER button.
NOTES
¡Opening the disc tray, turning off the power, press-
ing the SELECT button, or selecting AC at step [2]
and pressing the ENTER button will erase all
Markers.
¡To clear a marker using the Arrow button (s/B
)
,
position the cursor on to the marker number to be
cleared and press the CLEAR button.
¡You can mark up to 10 points.
5 Press the SEARCH MODE or RETURN but-
ton to exit.
CD
DVD-V