Filter
Top Products
99
Others
Recording
Playing discs EditingBefore you start Connections Getting started
Changing the SETUP menu
VCR functions Others
Español
Troubleshooting (cont’d)
Symptom Remedy
Remote control
The remote does not function. • Batteries are weak.
• There are obstacles between the remote and the unit.
• The remote is far from the unit.
• There are no batteries in the remote.
•Turn on the unit.
• The remote is not pointed at the remote sensor on the unit.
•
Press the DVD or VCR button, whichever you need. Then, try again.
• Check if a cassette tape is in this unit.
Others
The unit does not operate properly. • When static electricity, etc., causes the unit to operate
abnormally, unplug the unit and then plug it in again.
The disc tray does not open when you
press OPEN/CLOSE A button.
• It may take a few seconds for the disc tray to open after you
have recorded or edited a disc.
• This is because the unit is adding disc data to the disc.
Disc Error
Recording Error
Recording Error
Region Error
Parental Lock On
Recording Error
--- Please eject the disc. ---
Playback feature may not be
available on this Disc.
--- Please eject the disc. ---
Playback is not authorized in your
region.
--- Please eject the disc. ---
The current selected parental level
Prohibits playback.
This program is not allowed
to be recorded.
Recording Error
This program is not
recordable in Video mode.
This program is not allowed to
be recorded on this disc.
Unplayable disc is inserted
in the unit.
Insert the standardized disc which
bear the marks on page 43.
Recording Error
This disc is protected and not
recordable.
Can not record on this disc.
CauseError message Solution
Playback is not authorized
because the region code of the
DVD video disc you inserted is
defferent.
The current selected parental
level in the SETUP Menu
prohibits playback.
The recording function encountered
the copy prohibited program.
You are trying to record the copy-
once program onto the DVD-RW
disc in Video mode or the DVD
disc.
You are trying to record onto the
disc which is unrecordable, or the
disc status prevents recording.
You are trying to record the copy-
once program onto a DVD-RW
disc which is not compatible with
CPRM.
You are trying to record on to the
protected disc which is set in the
Disc Setting Menu.
Insert the DVD-Video disc with
region codes 1 or ALL.
Check the "Parental Lock" setting
(pages 92-93).
You cannot record copy prohibited
programs.
Set "DVD-RW Recording Format"
to "VR mode" (page 28).
Release the disc protect setting
in the Disc Setting menu (page 42).
Insert the recordable disc, and
ensure the disc status satisfies the
recording requirements (page 27).
Insert a ver 1.1 CPRM compatible
DVD-RW disc.
E9411UD.qx3 04.6.14 11:13 AM Page 99