Filter
Top Products
13
SELECTING TV OR
VIDEO
Press
TV/VIDEO
on the remote control
to view the selected input signal (
TV
)
or the audio/video source connected to
the TV’s input jacks (
VIDEO
).
USING AUTOMATIC AND
MANUAL CHANNEL
PROGRAMMING
When you turn on the TV for the first
time, use the automatic channel pro-
gramming feature to scan and memo-
rize all active broadcast and cable
channels in your area. If there are ad-
ditional channels you want to add or
delete, you can manually add or delete
them.
Using Automatic
Programming
1. Press
TV/VIDEO
so
TV
is selected.
2. Press
SET-UP
on the remote con-
trol or
FUNCTION
on the front
panel until
AUTO
PROGRAM
ap-
pears on the screen.
3. Press
VOL
+
or
–
. The TV auto-
matically scans and memorizes all
active channels in your area.
Note:
You can press any button
on the remote control or front
panel to stop automatic program-
ming.
When the TV has scanned and
stored all active channels, it stops
on the nearest programmed chan-
nel to where you started.
Now, when you press
CH
+
or
–
, the TV
skips inactive channels.
Note:
If the TV is unplugged for more
than 24 hours, you must repeat auto-
matic channel programming to restore
channels in memory.
Manually Adding a Channel
To add a channel that was not stored
during automatic programming, follow
these steps.
1. Press
TV/VIDEO
so
TV
is selected.
16-289.fm Page 13 Tuesday, July 20, 1999 10:57 AM