Teac 7250 TV Receiver User Manual


 
35
Q. When I record, the recording is not playing back properly. It is breaking-up.
A. This is possible if your signal level is too low. Check the Diagnostics->TV Signal menu. If SNR is
less than 20.0dB, then this problem may exist. As a rule, if the set-top box detects a low signal level,
it will give more signal to the first tuner so you may continue to watch digital television and timeshift.
You will need to improve your reception a little. Try using some small antenna signal booster.
Q. The time is shown incorrectly on my set-top box. How do I fix this?
A. Go to the MENU->PREFERENCES->DISPLAY menu option. Change the timezone. Victoria for
example is GMT+10 hours.
Q. When I go to standby, the Hard-disk continues to spin.
A. This is normal. It does not shutdown immediately.
Q. When I go to some websites, the Flash items are not displayed.
A. This is normal. The browser in the 7250 is set-up for television applications. The 3
rd
party plugins
such as Macromedia Flash are not supported.
Q. I am trying to set a reminder and timer recording from the GUIDE, but it displays an error.
A. This is normal. Only one timer may be set. A reminder is the same as a timer with equal start and
end times.
Q. When I use the GRID GUIDE VIEW, the information is not all displayed and is slow.
A. The grid view is designed for multi channel cross-carry information from broadcasters. This is
currently not available in Australia. We recommend using the NOW&NEXT view.
Q. When I complete PC exporting all my recordings, the share is no longer available in the
Mediaplayer.
A. This is normal. You must go back to the RECORDING EXPORT menu and press yellow to retest
and blue to save.