Filter
Top Products
4
TEAC PortaDVD User’s Manual
Front and Right Panels
Figure 2. Front and Right Panels
On/
Busy indicator:
This LED indicator lights up during seek/data
transfer and flashes to indicate that the drive is in seek, play, or read
mode.
Eject button:
Press the Eject button to release the disc tray from the
drive. Gently pull the disc tray to open it, or push to close. Certain
software can control disc eject.
Emergency eject mechanism:
To eject a disc when the standard
means fail, insert a slender, straight tool (such as a straightened
paper clip) into the emergency eject hole. Press firmly to partially
extend the disc tray.
Power supply selection switch:
Use this switch to set the power
source for the PortaDVD drive. Refer to “Power Sources/Battery” on
page 3.
Line out audio/ headphone jack:
You can connect headphones or
external speakers to this 3.5 mm stereo mini-jack. See “Connecting to
Audio Equipment” on page 6 for more information.
AC Power input:
Connect the AC adapter to this plug.
Caution:
Do not forcefully pull open or close the disc tray by hand or you
may damage the unit.
PortaDVD.book Page 4 Saturday, February 17, 2001 7:25 PM