Filter
Top Products
9
9
Attaching the stand
DETACHING THE STAND
Detaching the Stand
1) Remove the screws highlighted
IMPORTANT - Before drilling any holes in the wall ensure you are not drilling
where there could be any electric wires, water or gas pipes.
Wall mounting the TV
This television requires a VESA 400 x 200 wall mount, or equivalent.
1) Remove the four screws highlighted below.
2) The wall mount can now be easily attached to the mounting holes on the rear of the TV. These holes
are indicated in the picture below.
Important – If wall mounting this TV, only use the screws already
provided in the wall mounting holes. Using other screws which
are longer could cause irreparable damage to internal parts.
fi g 2
For optimum viewing, if wall mounting the TV higher than eye level,
the TV should be tilted downwards so that the TV’s screen is ‘face
on’. See fi g 1 and 2
TV
TV
Viewing angle
Viewing angle
2) Although there are no live parts exposed when removing the stand,
(in the event of wall mounting the TV) for aesthetic purposes, included
in the accessory pack is a cover plate which can be clipped into the
underside of the TV.
fi g 1
Manual - Technika - LCD32-244.indd Sec1:9Manual - Technika - LCD32-244.indd Sec1:9 9/6/2010 4:51:53 PM9/6/2010 4:51:53 PM